Mistakes when choosing a bucket for a telescopic loader

A properly selected bucket is not just an attachment, but a tool that directly affects productivity, equipment life and business costs. However, typical mistakes are often made when choosing one.

1️. Ignoring material density

The bucket should be selected for the materials you actually work with. If the equipment is designed for up to 1000 kg/m³ but is used for denser material, this will overload the boom and hydraulics and cause premature wear.

2️. Incorrect volume

A larger bucket does not mean a more efficient one. Excessive volume with heavy material reduces the stability of the machine and increases the load on the frame.

3️. Incompatibility with the loader model

Different machines have different load capacity and boom geometry characteristics. For example, Manitou, JCB or Merlo equipment has its own technical features and the bucket must correspond to them.

4️. Saving on steel material

The thickness and grade of steel matter. Structural alloy steel and wear-resistant blades (e.g. HARDOX 500) significantly extend the service life of the equipment.

5️. Ignoring tasks

A grab bucket is needed for silage, wood chips, manure or green mass. For pallets, forks are needed. For large volumes of bulk materials, a different configuration is required. One universal option does not cover all needs.

The right choice is a balance between volume, material density, equipment load capacity and type of work.

If you are unsure about your choice, it is better to seek advice than to end up with overload and unnecessary expenses. Techno-Dvor selects solutions for specific tasks, rather than average market solutions.